DetailOAR Field Manual · Learning path

Learn Paint Correction

Move from decontamination and paint assessment to a proven one-step, advanced multi-step work, coating, and high-control QC.

5 guidesshop / hybrid2.5 hours reading plus extensive panel practice and supervision

Start with guide 1

Start at the top. Your progress stays on this device.

Illustrative generated close-up of a detailer inspecting swirl marks and a corrected test area under a paint light.

Recommended order

One useful result at a time.

Finish a guide, then move to the next unlocked step.

Phase 1
Prepare the surface
Correction starts on decontaminated paint — or it doesn’t start.
1Detailing Skills · 17 min readChemical Decontamination and Clay TreatmentNot started

Diagnose what’s actually bonded to the paint, treat it with compatible chemistry and well-lubricated mechanical work, then check for marring before any protection goes on.
Action: 45–120 min
Open guide 1
Phase 2
Correct with control
A proven one-step first, then multi-step work built on test spots.
2Detailing Skills · 20 min readHow to Perform a One-Step Machine PolishNot started

Read the paint before you touch it, prep and mask, prove a least-aggressive test spot, polish with the pads and panel temperature under control, inspect hard, then protect.
Action: 4–8 hr
Open guide 2
3Detailing Skills · 24 min readPaint Correction: Defect Inspection, Test Spots, and Multi-Step PolishingNot started

Plan advanced correction like the irreversible work it is: classify defects and paint risk, prove the test system, keep cut and finish stages separate, control heat and residue, and refuse unsafe removal.
Action: 1–3 days
Open guide 3
Phase 3
Protect and prove it
Coating on properly finished paint, and the QC that catches high spots.
4Detailing Skills · 22 min readCeramic Coating Preparation, Application, and Customer AftercareNot started

Build a controlled coating environment, verify the paint and product suit each other, apply and level exactly by the manufacturer’s system, guard the cure, and hand over exact aftercare.
Action: 1–3 days including initial cure
Open guide 4
5Detailing Skills · 18 min readFinal Quality Control, Customer Handoff, and Working Faster Without Cutting CornersNot started

Put staged quality gates, a fixed final inspection route, an evidence-based handoff, and honest time studies to work — and raise throughput without deleting safety or quality.
Action: 20–40 min per job plus weekly review
Open guide 5